UK Monster Owners Club Forum - View Single Post

Luddite · 06-05-2018, 10:11 PM

I think the 696 is like the 1100S in that it has a lower riser. The Evo's is 20mm higher and, as I understand it, fits with no cabling problems.

http://www.ukmonster.co.uk/monster/s...80&postcount=2

This picture shows the difference between the Evo riser and 1100S version, (which I think is the same as yours).

My standard Evo riser measures 58mm from base to top. The CNC Racing one I have is listed as 59mm but, because of an additional spacer, actually raises the bars by about 7mm. So, if your standard riser is a low one, you should be able to add at least another 27mm without encountering any problems.

And yes, the standard brake lines are (black sheathed) braided.

06-05-2018, 10:11 PM	#8
Luddite Registered User Join Date: Aug 2011 Location: Southampton Bike: M1100evo Posts: 2,465	I think the 696 is like the 1100S in that it has a lower riser. The Evo's is 20mm higher and, as I understand it, fits with no cabling problems. http://www.ukmonster.co.uk/monster/s...80&postcount=2 This picture shows the difference between the Evo riser and 1100S version, (which I think is the same as yours). My standard Evo riser measures 58mm from base to top. The CNC Racing one I have is listed as 59mm but, because of an additional spacer, actually raises the bars by about 7mm. So, if your standard riser is a low one, you should be able to add at least another 27mm without encountering any problems. And yes, the standard brake lines are (black sheathed) braided.