Today’s efforts,
1. At the top of the picture a pattern for the CF plate which will hold the connectors behind the headlamp (the mark 1 aluminium version is to the right). I have made the pattern with square edges which can be trimmed after the part is moulded, I was never really happy with the cut-away in the aluminium one in any case (the arc was prescribed freehand and then had to be adjusted (made a lot bigger) with a file; and
2. Two of the components which will enable a tool box/glove box in the seat hump, one for glue-ing to the existing seat pattern to de-lineate the tool box opening and the space for the Dzuz fastener and the second to be the pattern for the CF plate that will perform two functions, a backing plate for seat hump foam pad and second a lid for the tool box. I better stop calling it a glove box as I do not think any of my gloves would fit inside. There is a strong possibility that the seat latch mechanism attached to the seat will inhibit further the space inside.
