Here we go again.
Have had carbs ultrasonically cleaned, fitted the Dynojet stage 2 kit and reassembled both carbs.
Now we are back to Short(ish) Term Memory Loss Land!
I hope someone can tell me where the cable guide and oil pipe go (arrowed in pic) I took loads of photos when I was disassembling but there's always something somewhere I miss!
I think the cable guide fixes to the u/s of the float bowl somewhere, but which way round and where I can't tell.
My vague memory is that the oil pipe runs between both carbs carrying hot oil for de-icing and goes from one float bowl to the other. My guess is it connects to the two inner banjo bolts in the float bowls and the oil feed from and return to the oil cooler attach to the outside two.
Can anybody help with either, a pic would be ace!