Quote:
Originally Posted by Mr Gazza
Sounds like you've got the horizontal tension cock on to me. Even when it's right with a 5mm Allen key you can still get a 6mm through with enough will, so I would be happy with that. Over tight is a bad thing, slightly slack won't do any harm. As you say it won't slip.
Remember to use a 6mm key on the vertical belt with a 7mm being very hard to pass.
|
Good evening Mr Gazza,
I'm in the process of doing my M750 belts & tensioner bearings (that bit was fun
) and I'd like you to know why you recommend a slightly slacker tension on the vertical belt please?
Thank you!