UK Monster Owners Club Forum - View Single Post

Nickj · 10-12-2017, 12:05 AM

You start at the 'outside' and work inwards...
seat then tank
all the wiring connectors
airbox (and all the sundry bits like battery ignitor boxes)
Carbs
Exhausts (from the motor outwards and all the hangers)
Up to there its all standing up by itself.
All the wiring connectors going to the motor

.....

Get the motor supported
Bolts holding frame to motor and swinging arm to frame

Take the frame (with forks attached or remove them first plus all the wiring to bars and lights) off
Take the swinging arm off

You now have a pile of bits that will probably go back together to make a monster

10-12-2017, 12:05 AM	#7
Nickj Too much time on my hands member Join Date: Jun 2007 Location: Forest Of Dean Bike: S2r Posts: 3,189	You start at the 'outside' and work inwards... seat then tank all the wiring connectors airbox (and all the sundry bits like battery ignitor boxes) Carbs Exhausts (from the motor outwards and all the hangers) Up to there its all standing up by itself. All the wiring connectors going to the motor ..... Get the motor supported Bolts holding frame to motor and swinging arm to frame Take the frame (with forks attached or remove them first plus all the wiring to bars and lights) off Take the swinging arm off You now have a pile of bits that will probably go back together to make a monster __________________ "The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature