Hi
I fitted one to a '93 m900 as follows:
1. Take the upper top clamp bolt out of top yoke on each side.
2. Use the longer bolts and spacers [Suplied in kit] to fix the flattened ends of the alloy rods to the top yoke, with the rods pointing forwards.
3. Push the rubber top hat insert/nuts into the ends of the rods.
4. Slacken off the headlamp mounting bolts and slide in the slotted leg of the L shape brackets [Supplied in kit].
5. Push a rubber top hat insert/nut through the hole in each L bracket.
6. Offer up the carbon fibre to the fixings: bottom ones to the L brackets and upper ones to the rods.
7. Check headlight alignment and fettle, then tighten up all bolts.
8. Fit screen.
Hope this helps?
Mark