View Single Post
Old 12-03-2020, 06:04 PM   #9
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,766
Quote:
Originally Posted by FrankenDesmo View Post
I had not heard of doing that before - is that just to remove any traces of resistance?
They seem to be the same plugs, heat range aside, except yours have a Projected insulator (whatever that means), and take a 16mm socket instead of 18mm..
I use the threaded nipple ones because the nipple doesn't fit into my plug caps, I have to remove them and just use the treaded portion bare. If you need the nipple, the fixed ones are a little cheaper.
Don't ask me what a projected insulator is! Probably like overhead mudguards or underslung overdrive? (Chain.)

Regarding your asymmetric mixtures, I wonder if one of the diaphragms is split and not lifting the needle valve/jet properly?
__________________

Last edited by Mr Gazza; 12-03-2020 at 06:07 PM..
Mr Gazza is offline   Reply With Quote