[Leamreject]

All sorted, stripped it down several times now, the pack size is 38.5mm so within tolerance. However, the pack consists of 9 discs and 9 clutch plates not 8 as expected. No dished or convex types.

The odd thing is, that I don’t actually know what corrected it, after watching several youtube clips and other bits on the interweb without success, I eventually added a 4mm insert to the slave because I wasn’t getting enough movement, well that gave me no drive at all, so I went 3mm which appeared to work but on riding it was slipping.

I knew then that a spacer wasn’t the issue because fitting a 2mm one just wouldn’t make sense. However, on removing the 3mm spacer the problem went away which has really confused me now. I can only assume that something must not have been seated correctly and on fitting the spacer the additional movement settled something… very odd but now it’s working as expected.