UK Monster Owners Club Forum - View Single Post - 1999 M900- questions re exhaust and also neutral switch

Mr Gazza · 16-06-2019, 09:03 AM

Welcome aboard Mark.. I'm sure I've met your brother, Budgie?

Hope you get your switch sorted..Should be an easy fix.

P.S. I think the spacers are 10mm thick on the offside and 8mm thick on the nearside, but you need to check the bolt length is okay with those.
They go against the crankcases at the bottom of the hangers. beware you can puncture the cases with too long a bolt, or lack of spacer!
Moto Rapido would be able to supply the correct spacers and shouldered bolts too if required, and tell you which side which size goes.

16-06-2019, 09:03 AM	#12
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,806	Welcome aboard Mark.. I'm sure I've met your brother, Budgie? Hope you get your switch sorted..Should be an easy fix. P.S. I think the spacers are 10mm thick on the offside and 8mm thick on the nearside, but you need to check the bolt length is okay with those. They go against the crankcases at the bottom of the hangers. beware you can puncture the cases with too long a bolt, or lack of spacer! Moto Rapido would be able to supply the correct spacers and shouldered bolts too if required, and tell you which side which size goes. __________________ Last edited by Mr Gazza; 16-06-2019 at 11:42 AM..