Exhausts quite snug but you may have some spacers missing, you should have ~10mm clearance to the swingarm. Or if it’s been dropped it’s possible the footrest hangers/exhaust brackets aren’t quite straight. It’s fairly common to have difficulty getting the cans symetrical.
Neutral switch: have you proved the switch is faulty by shorting the wire to earth?
No point in removing a good switch if you have an electrical fault elswhere. The connector is prone to corrosion in its exposed (yet recessed) location, it may just want a good clean.
You’ll need a thin wall, deep socket to get the switch out, sorry don’t remember the size off the top of my head.
|