I sort of understood that initially and not to repeat it next time but thanks it works.
Little bit of stuff going on mainly in supply of parts coming in from folks and shops.
Big shout out for the banjos which are already cleaned up ready to go to plating even though got this afternoon.
https://s1.postimg.org/7x24thgen/IMG_2118_1.jpg
https://s18.postimg.org/pr0luh95l/IMG_2127_1.jpg
Got my plastic handlebar clamp bolt cover too and that's much nicer to look at then 3.
https://s1.postimg.org/jagp8ftz3/IMG_2109_1.jpg
Clutch plates here from Germany so can make and measure a stack and fit.
Decided a new oil breather hose is better than one that's had an end cut down and a split on end from Stein Dinse (but Ducati ). Clips look original and a pair.
Got the rear brake sorted and a paint touch up too and the brand new Brembo clips with Brembo dust caps which I had to but 2 off to replace.
https://s22.postimg.org/oy2akcprl/IMG_2125_1.jpg
https://s24.postimg.org/sghld56d1/IMG_2117_1.jpg
Bearings SKF for cams and oil seals too.
Starter motor gasket
Passenger footrests can be fitted now as got ball bearings to fit now.
Also got radiator mount rubbers from not Ducati but on ebay . 4 for less than the price of 1 OEM one and to be honest better as its 20mm dia x 20mm long and not the OEM of 25mm dia and 20mm long. The OEM are to big really and unnecessarily so. Have 2 spare if any one has perished but were £5.79 inc post for 4 Ducati are £6.86 each plus post.
https://s21.postimg.org/n4rroi97b/IMG_2116_1.jpg
https://s13.postimg.org/snheg1nif/IMG_2120_1.jpg
Just the gasket set and belts to get and piston circlips.