Finally finished my exhausts off late Friday night, one had been sitting 10mm lower than the other I thought just cut the last bend twist around a wee bit then weld up, was it feck ended up cutting the whole l/h side up and starting again 7hrs later finally happy with it.
Saturday afternoon took it off the bench put in some fuel and tried to start it up no joy! must have been an airlock in the fuel line from the tank to the diaphragm pump so used an airline and forced the fuel through
it worked first stab of the button and my daughter ran for cover feck it is loud.
Sunday, Have made small carbon caps for the end of the exhaust which calms it down to a sam acceptable level.Fitted the belly pan and a set of bar end mirrors. Still have brakes and clutch to bleed.