UK Monster Owners Club Forum - View Single Post - 1100 Evo mods

Luddite · 08-05-2017, 11:47 AM

Finally, some other things you can't see...

• Rexxer ECU remap from Neil at Cornerspeed. (http://cornerspeed.co.uk/tuning.php)
• Heavier 1100S flywheel (27610251C) (http://www.ukmonster.co.uk/monster/s...ad.php?t=54450)
• K-tech fork upgrade. (http://www.ktechsuspension.com/)
• Lambda sensor eliminators. (Not needed after the Rexxer remap.) (http://www.ebay.co.uk/itm/261212263637)
• Blanking plugs for the lambda electrical connections from 3waycomp (http://stores.ebay.co.uk/3waycomponents/) (10% discount for club members) (http://www.ukmonster.co.uk/monster/s...8&postcount=40)
• Stainless lambda blanking plugs (2 x M18 x 1.5) )(http://www.ebay.co.uk/itm/Stainless-...skAAOSwU8hY5Bb )
• Iridium spark plugs (NGK DCPR8EIX). Run with a 1mm gap.
• I also gave the headers a light polish and "debronzing" using this stuff. It works by chemical reaction rather than abrasion so is dead easy to use. The bronzing returns after 5-600 miles but it's a quick job to remove it again.

Wow! That list is scarily long! Note to self: never add up the total cost!

Well, I hope that's given some Evo owners a few ideas. Be aware though, once you start, you just can't stop!

08-05-2017, 11:47 AM	#12
Luddite Registered User Join Date: Aug 2011 Location: Southampton Bike: M1100evo Posts: 2,465	Finally, some other things you can't see... • Rexxer ECU remap from Neil at Cornerspeed. (http://cornerspeed.co.uk/tuning.php) • Heavier 1100S flywheel (27610251C) (http://www.ukmonster.co.uk/monster/s...ad.php?t=54450) • K-tech fork upgrade. (http://www.ktechsuspension.com/) • Lambda sensor eliminators. (Not needed after the Rexxer remap.) (http://www.ebay.co.uk/itm/261212263637) • Blanking plugs for the lambda electrical connections from 3waycomp (http://stores.ebay.co.uk/3waycomponents/) (10% discount for club members) (http://www.ukmonster.co.uk/monster/s...8&postcount=40) • Stainless lambda blanking plugs (2 x M18 x 1.5) )(http://www.ebay.co.uk/itm/Stainless-...skAAOSwU8hY5Bb ) • Iridium spark plugs (NGK DCPR8EIX). Run with a 1mm gap. • I also gave the headers a light polish and "debronzing" using this stuff. It works by chemical reaction rather than abrasion so is dead easy to use. The bronzing returns after 5-600 miles but it's a quick job to remove it again. Wow! That list is scarily long! Note to self: never add up the total cost! Well, I hope that's given some Evo owners a few ideas. Be aware though, once you start, you just can't stop! Last edited by Luddite; 27-02-2020 at 01:10 PM..