UK Monster Owners Club Forum - View Single Post

Mr Gazza · 09-07-2020, 01:08 PM

I just pushed a Monster top yoke over the protruding leg tops on my SS. The stem nut does not register correctly, so there is approximately 5mm difference in the offsets.

So SS bottom yoke is not compatible with Monster top, but you could use a pair with due regard for the different trail (except you would then have no handlebar clamps!)

Quite good that this has been brought up as I had assumed they were the same and plan to fit Monster yokes to the SS, so now I know I need to address the trail.

I'm not entirely sure but I think the stems could be different lengths too, as the nut is proud on a Monster and flush, if not recessed a bit on the SS.

09-07-2020, 01:08 PM	#12
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,806	I just pushed a Monster top yoke over the protruding leg tops on my SS. The stem nut does not register correctly, so there is approximately 5mm difference in the offsets. So SS bottom yoke is not compatible with Monster top, but you could use a pair with due regard for the different trail (except you would then have no handlebar clamps!) Quite good that this has been brought up as I had assumed they were the same and plan to fit Monster yokes to the SS, so now I know I need to address the trail. I'm not entirely sure but I think the stems could be different lengths too, as the nut is proud on a Monster and flush, if not recessed a bit on the SS. __________________ Last edited by Mr Gazza; 09-07-2020 at 01:10 PM..