Quote:
Originally Posted by Kato
You need to be carefull here as I know you have those nice new FCR's which don't like anything over 3 psi and a standard Efi pump is designed to run at 3.5 bar thats 49.3 psi, the same will apply to Utopia's problem if an injection pump is used its going to result in a big puddle of expensive fuel on the floor.
|
Yes I'm aware it might be a problem but I was hoping that by pumping fuel through a loop with no restrictive pressure regulator and with only a take-off for the carbs that I might be OK as the pressure would all go back to the tank.
If not I'll get a carby SS pump, which I believe should fit as it looks very similar.
I could probably run gravity feed as the carbs are much lower than the standard Mikunis but the tank feed isn't best setup for it, so might cause fuel starvation when the level gets low? and I'd prefer to keep the filter in the tank.
