[Darren69]

Not much to update but I had noticed that one of the wire crimps to the mega thin Chinese number plate and rear light wires is a bit loose so will solder and fix as I have done for the others, solder and shirnk wrap.

I sourced some cheap clear indicator lens and frame plugs which update the bike to a more current period appearance in (I think) keeping with the overall look of the bike and appear to be ok but the quality of the plastic for the lens's is a bit sketchy and I managed to strip both rear ones out, so some another even cheaper ones were sourced (I originally figured the postage cost from Australia to be ok for a complete set of 4, but on reflection not so good since I only got 2 out or 4 good ones) Oh well, buy cheap, buy twice! . The internal connections on one were bad (not sure why just the one side) but I found out that the reflector can actually be removed and wires removed, the verdi green copper connections cleaned up, and result!