Quote:
Originally Posted by Nasher
Can somebody confirm then please, for the Teatray screws.
There are 2 x 30mm long plus 2 x 25mm long.
All are M6 thread with a Dome head.
But
All have a 5mm Allen socket.
All have a 14mm diameter head – Can somebody measure this please.
The above suggests a standard sized M6 Dome head screw but with an M8 sized head.
The images I’ve found of the latest part numbers actually show a standard sized M6 x 25(or 30)mm Dome head screw without the larger head.
This could be because the part has been replaced with a standard sized screw to make life easier for Ducati.
Unfortunately buying in std M8 screws, and turning them down, and rethreading them to M6 would be laborious with my lathe, so I’ll need to ask somebody I know with a CNC lathe to quote for a batch of say 50pcs.
Nasher.
|
This is what my '94 M900 had holding the tea tray in place: all the same 20mm length as there were no side pieces fitted to the "fender"?
