UK Monster Owners Club Forum - View Single Post

350TSS · 23-03-2017, 02:28 PM

Another job tackled today, I bent up some 2mm steel for subsequent brazing to the frame. This is to hold the hanger bracket for the exhaust can.

screenshot on pc

Then using some of the 4mm aluminium from the road sign I made the hanger bracket itself

[img]http

image hosting over 5mbs://s12.postimg.org/o1y34r0ql/Exhaust_hanger_bracket_1.jpg[/img]free image uploading

I think the finished product looks too wide so I shall probably reduce it in width by about 10 - 12 mm although now it is bent I will not be able to use a jigsaw easily and I do not fancy filing 12mm. One day when it is raining outside and I am feeling energetic???

23-03-2017, 02:28 PM	#93
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,419	Another job tackled today, I bent up some 2mm steel for subsequent brazing to the frame. This is to hold the hanger bracket for the exhaust can. screenshot on pc Then using some of the 4mm aluminium from the road sign I made the hanger bracket itself [img]http image hosting over 5mbs://s12.postimg.org/o1y34r0ql/Exhaust_hanger_bracket_1.jpg[/img]free image uploading I think the finished product looks too wide so I shall probably reduce it in width by about 10 - 12 mm although now it is bent I will not be able to use a jigsaw easily and I do not fancy filing 12mm. One day when it is raining outside and I am feeling energetic???