blackthorn

So today i sorted out the wiring for the indicators. It began with doing a continuity test which showed that there was nothing there, not a sausage! So i started to strip back the loom and it turns out the original owner hadn't finished hooking stuff up before wrapping the loom back up...



The green/white wires weren't attached from just after the loom plug so neither front/rear worked on the right where as the black/white for the left side was wired into the front one but not the rear so had to splice them together.



I did solder eveything but my soldering isn't worth of pictures












Waiting on diagnostic stuff arriving then it's time to get set in about it to get it running properly...