Quote:
Originally Posted by Luddite
On the 1100S with the Öhlins forks, the rebound adjusters are the H-S screws on the fork tops while the compression adjusters are on the sides of the fork bottoms, just above the wheel spindle.
For what it's worth, the factory settings are:
Compression - 8 clicks out from fully closed
Rebound - 12 clicks out from fully closed
Preload - 3 turns in from fully open
And the stock spring weight is 7.5N/mm
|
I was told by Ohlins that the screws on the top of the fork are the compression adjusters, and the ones at the bottom are rebound.
I weigh 75 kilos without kit and have my preload at 3 turns in from fully out, compression at 4 clicks in, and rebound at 3.
Although Mine have been re shimmed at Maxtons and heavier springs @8.5
If it were me, I'd start by softening the pre load.