UK Monster Owners Club Forum - View Single Post - Clutch tools and fork install height. 1000Sie

slob · 04-07-2019, 06:14 PM

I've used the ones that bolt to the case, similar to (but slightly different)
https://www.ebay.co.uk/itm/NEW-CLUTC...sAAOSw0YVcUFve
without a problem, even on Magnesium cases, maybe I've just been lucky.
You do need to be careful where mine engages, as it will try to push the steel reinforcing ring down the basket if you don't pay attention to where it fits.
As others have said, I'd avoid the Laser ones, they're cheapo ABS, especially since the long handle ones are now available relatively cheaply.

I have renthal bars on mine, which are wider in the middle than stock and require the forks to be pushed down a little to clear the preload adjusters, however handling seems happy with Ohlins shock in the back.

04-07-2019, 06:14 PM	#9
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,712	I've used the ones that bolt to the case, similar to (but slightly different) https://www.ebay.co.uk/itm/NEW-CLUTC...sAAOSw0YVcUFve without a problem, even on Magnesium cases, maybe I've just been lucky. You do need to be careful where mine engages, as it will try to push the steel reinforcing ring down the basket if you don't pay attention to where it fits. As others have said, I'd avoid the Laser ones, they're cheapo ABS, especially since the long handle ones are now available relatively cheaply. I have renthal bars on mine, which are wider in the middle than stock and require the forks to be pushed down a little to clear the preload adjusters, however handling seems happy with Ohlins shock in the back. Last edited by slob; 04-07-2019 at 06:21 PM..