I've changed the bearings on my 750 .. when I fitted a 900 ally swingarm.
It was a while back and so the memory is a bit hazy but it wasn't exactly an easy job.
I had to buy a bearing puller/slide hammer kit and even with that it wasn't easy.
Had to slit the bearing case on at least one of the four bearings with a dremel to get it out.
Managed it in the end but its definitely tricky in my experience.
Also the spindle did show some signs of wear.
I may have been able to reuse it but the ally arm needed a longer one anyway.
No telling how yours is til you get it out unfortunately.
|