Quote:
Originally Posted by 900Rebuilder
I've got a 900ie motor to go into my carbed frame (with loom and carbs etc) so need to make the "new" engine work in the old frame. I'll also be using an Ignitech ignition system as well if that helps or matters  |
This seems to be a simple enough question.
Assuming that the new engine already has an alternator, then all you have to do is match it with either a two or three wire Regulator/Rectifier, depending how many Yellow cables come out of the alternator. 900ie should have three.
If you don't have an alternator yet then 3-phase is definitely the way to go.
Not sure how this swerved to flywheel, but standard will work just fine on that.