Quote:
Originally Posted by Luddite
Absolutely! You should bring out a calendar.
|
I have to say my new Iphone takes great photos! in fact I have stopped using my SLR all together now!
Been out and about the last few days bedding things in after the rebuild... one thing I noticed was its slow to turn over when you start it. I had upgraded the cables, and the starter itself was good, so I had another look at the timing. When I did the map, I had the first RPM point at 400 with 10 degrees BTDC and the second at 1000 again with 10 degrees... so i changed this to 5 degrees from 400 to 1000, so there is not so much advance at cranking speed.
I also configured the software so it did two full dead revolutions before it sparks...* this means the engine is properly spinning before it fires... It really spins over now and starts MUCH better