|
I have a few rear stands with long handles and wheels that you can "cam under" but they all rely on an uncluttered lower portion of the swinging arm which I do not have, also the bench on which the bike is perched is only just long enough and the long lifting arm only just rests on the "deck" and extending about 600 mm off the end of the bench is liable to be knocked banged /into causing precious bike to fall over and off the bench.
As for lifting the bike onto the new fabricated stand that is me straining (I am hoping to get this bike under 150 kg so only a 75kg or so lift of 75mm or so) and No 2 son positioning said stand underneath the bar passing through the axle (5/8" solid steel bar).
|