UK Monster Owners Club Forum - View Single Post

slob · 17-07-2019, 01:05 PM

Sounds right

2 driven plates (2mm each)
1 drive plate (3mm)
1 dished driven plate (1.5mm)
6 of each driven/drive (2mm/3mm)

gives you ~38.5mm (since the dished plate may alter the height a fraction)

allowing for wear down to 2.8mm on each drive plate, a minimum of 37.1mm
38.5 - (0.2 x 7) = 37.1

minimum spring fee length should be 36.5mm

I'm pretty sure (from memory) the dished plate has a punch mark on it which should be outwards, but can't find a reference to it in any of my manuals

http://ukmonster.co.uk/monster/showt...tack+height%22

17-07-2019, 01:05 PM	#12
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,714	Sounds right 2 driven plates (2mm each) 1 drive plate (3mm) 1 dished driven plate (1.5mm) 6 of each driven/drive (2mm/3mm) gives you ~38.5mm (since the dished plate may alter the height a fraction) allowing for wear down to 2.8mm on each drive plate, a minimum of 37.1mm 38.5 - (0.2 x 7) = 37.1 minimum spring fee length should be 36.5mm I'm pretty sure (from memory) the dished plate has a punch mark on it which should be outwards, but can't find a reference to it in any of my manuals http://ukmonster.co.uk/monster/showt...tack+height%22 Last edited by slob; 17-07-2019 at 01:08 PM..