UK Monster Owners Club Forum - View Single Post - M750 Rear suspension adjustment problem :/

Flip · 24-06-2018, 10:55 PM

It might not have been that the previous owner was a shorty- they come as standard with the rod ends wound almost all the way into the hoop.

I definitely second McGill Motorsports for supplying the Rose Joints (Rod Ends) though and these are what you need:

http://www.mcgillmotorsport.com/m10-...ce-rod-end-93/

Louigi Moto can supply the spacers if you prefer to have a predetermined ride height but you will need to cut some off the thread of the Rod Ends if you want to use them.
It looks like you will have to email or call Rich there too as they don't seem to have any listed at the moment.

http://louigimoto.com/index.html
Tel - +44 (0)1761 453366

If you just set the height through the rod ends as I did it'll look something like this when it's done:

24-06-2018, 10:55 PM	#6
Flip Registered User Join Date: Mar 2010 Location: Beachtown Bike: M900 Posts: 2,188	It might not have been that the previous owner was a shorty- they come as standard with the rod ends wound almost all the way into the hoop. I definitely second McGill Motorsports for supplying the Rose Joints (Rod Ends) though and these are what you need: http://www.mcgillmotorsport.com/m10-...ce-rod-end-93/ Louigi Moto can supply the spacers if you prefer to have a predetermined ride height but you will need to cut some off the thread of the Rod Ends if you want to use them. It looks like you will have to email or call Rich there too as they don't seem to have any listed at the moment. http://louigimoto.com/index.html Tel - +44 (0)1761 453366 If you just set the height through the rod ends as I did it'll look something like this when it's done: __________________ You're perfect, yes, it's true- But without me you're only you! Last edited by Flip; 24-06-2018 at 10:59 PM..