Quote:
Originally Posted by EkO
Trying to raise the rear suspension on my 1997 M750 as the previous owner must've been a shorty. Problem is, I'm trying to undo the bolts that go through the rod end bearings on the bottom of the hoop are seized big time :/
Anyone else have this problem? And I'm assuming the hex bolthole on the back is just for tightening the nut on as I've tried turned that aswell and it was just wanting to snap my allen key!!
|
They are shouldered bolts with a skinny head.
https://www.stein-dinse.biz/images/p.../77910021b.jpg
If you can get the nut loose they should tap out. Try and get some oil into them.
You can get good replacement rose joints from McGill motorsports, but take care not to lose the sleeve between the bolt and the rose joint. They are expensive for what they are.