Quote:
Originally Posted by davkyt
A bit stuck on a couple of bits...
Disconnecting the throttle cables from the carbs.
Is there a way of doing this without bending the gold bracket?... It looks like a bitch to get at.. And once at it I can't see an obvious way to get the pins out without bending the carrier
The neutral switch.... Looks easy to get out.... But I just can't get at with a spanner or a socket...
.... Any advice?
|
You don't have to bend any metal to get cables out. Just get all the slack off and unlock the lock nuts etc. You have to rotate the cam to a point where you can slip the nipple and cable through the slot.
Regarding neutral switch I never removed mine and just masked it up and cleaned and painted with it intact.