UK Monster Owners Club Forum - View Single Post

350TSS · 31-07-2017, 05:36 AM

Another problem I did not think about was that moving the crease away from the pivot caused it to cross the hole for the retaining screw at the front. This meant that the resulting "joggle" on a test piece of aluminium had an 8mm gap. This is not the end of the world but annoying nonetheless.

31-07-2017, 05:36 AM	#232
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,421	Another problem I did not think about was that moving the crease away from the pivot caused it to cross the hole for the retaining screw at the front. This meant that the resulting "joggle" on a test piece of aluminium had an 8mm gap. This is not the end of the world but annoying nonetheless.