|
+1 for Rosso Corse.
The service schedule I had for the big service on Edna with belt change this year:-
Reading of error memory,
checking for technical updates/recalls,
oil and oil filter change,
engine oil pressure check,
valve clearances,
change timing belts,
check/clean/replace spark plugs,
change air filter,
change brake and clutch fluid,
check and adjust brake and clutch controls,
check and lubricate throttle/cold start,
check brake pad and disc wear,
check stearing head bearings and wheel hubs,
check rear wheel flexible coupling,
check tightening of the safety components,
check and lubricate rear wheel shaft,
check final drive tension and lubrication,
check final drive wear (chain etc),
Visual check of front forks and rear shock seals,
check movement on side stand,
check rubbing points,
clearance of movement on hoses and electrical wiring,
check external fuel lines, lubricate and grease,
tyre presure/wear checks,
check battery charge level,
check throttle body synch and idling,
check operation of safety devices (e.g. sidestand sensor),
check indicators and lighting,
Reset service indicator,
road test of the bike,
cleaning the bike,
fill in service log.
|