View Single Post
Old 02-07-2013, 12:24 PM   #15
Cobra88
Guest
 
Posts: n/a
Hi Simon

It should work with the DP ECU as the plugs just stop the Emgine Management lamp staying on when you unplug the o2 sensors.

When I was into KTM tuning the only way to get them to ride slowly and not stall was to turn off the O2 sensor system with a program called TuneEcu but sadly no software I can find that works on my Ducati so I bought the eliminators instead.

The eliminator plugs are very easy to fit.
Just start at each O2 sensor in the headers and trace the wires back to the plug.

on the M1100 evo the rear sensor plug is tie wrapped to the inside of the rear subframe rail on the right side.

the front sensor is just behind the fusebox on the right side of the frame.

took me 10 minutes to get the plugs fitted and re fix the rear sensor lead to the subframe rail so it can't touch the rear header.

Regards
Rick

Only fusebox needs sliding out of it's clip and seat off with key.

Last edited by Cobra88; 02-07-2013 at 12:29 PM..
  Reply With Quote