UK Monster Owners Club Forum - View Single Post

gary tompkins · 04-09-2005, 10:57 PM

It would be a water temperature sensor on S4's, but just a temperature sensor on aircooled bikes like the 620/900ie.

See if you can borrow one of another injected bike (either 900 or 1000ie) and swap them over, as this is what Dave did on mine - borrowed Fatblokes sensor from his 1000ie. If the bike runs ok you've sussed it and need to buy a replacement - about £50.

BTW Dave test metered both mine & FB's sensors and got the same reading from both?? But my engine would only run right using a replacement switch so the original was deffo knackered - did about 18,000 miles.

04-09-2005, 10:57 PM	#9
gary tompkins 1/2 man - 1/2 pogo-stick Join Date: Aug 2002 Location: Dartford, Kent Bike: M900ie Posts: 7,241	It would be a water temperature sensor on S4's, but just a temperature sensor on aircooled bikes like the 620/900ie. See if you can borrow one of another injected bike (either 900 or 1000ie) and swap them over, as this is what Dave did on mine - borrowed Fatblokes sensor from his 1000ie. If the bike runs ok you've sussed it and need to buy a replacement - about £50. BTW Dave test metered both mine & FB's sensors and got the same reading from both?? But my engine would only run right using a replacement switch so the original was deffo knackered - did about 18,000 miles. __________________ GT Fully paid up member of the S.A.S. (Scottoiler Appreciation Society) 27,000 miles on original chain - and still going strong! Last edited by gary tompkins; 04-09-2005 at 11:03 PM..