steve kearl
21-06-2004, 11:46 PM
Is anyone interested in changing their footrest hangers and gear lever bolt to stainless steel as I have done some measurements and done a drawing (not the best drawing) and have contacted Inox of southampton (John Kemp) and he says he can get them made for £4.50 each if he get an order of 100.
If anyone is interested and would like to cheque my drawing and measurements then we can go from there. I have put the drawing in as an attachment. These measurements are from 02 Monster S4 4 at this size
A = Pan Head depth 0 to 4mm in height
B = Non threaded area 19mm in length
C = Non threaded area Diameter 12.5mm
D = Threaded area is M8x29x1.25mm
E = Pan head outer Diameter is 25 mm with a Allen socket size of 6mm.
4 at this size
A = Pan head depth 0 to 4mm in height
B = Non threaded area 19mm in length
C = Non threaded area Diameter 12.5mm
D = Threaded area is M10x34x1.50mm
E = Pan head outer Diameter is 25mm with a Allen socket size of 6mm.
And finally 1 at this size
A = Pan head depth 0 to 3mm in height
B = Non threaded area 22mm in length
C = Non threaded area Diameter 19mm
D = Threaded area is M8x14 x1.25mm
E = Pan head outer Diameter 19mm with a Allen socket size of 6mm.
If anyone is interested and would like to cheque my drawing and measurements then we can go from there. I have put the drawing in as an attachment. These measurements are from 02 Monster S4 4 at this size
A = Pan Head depth 0 to 4mm in height
B = Non threaded area 19mm in length
C = Non threaded area Diameter 12.5mm
D = Threaded area is M8x29x1.25mm
E = Pan head outer Diameter is 25 mm with a Allen socket size of 6mm.
4 at this size
A = Pan head depth 0 to 4mm in height
B = Non threaded area 19mm in length
C = Non threaded area Diameter 12.5mm
D = Threaded area is M10x34x1.50mm
E = Pan head outer Diameter is 25mm with a Allen socket size of 6mm.
And finally 1 at this size
A = Pan head depth 0 to 3mm in height
B = Non threaded area 22mm in length
C = Non threaded area Diameter 19mm
D = Threaded area is M8x14 x1.25mm
E = Pan head outer Diameter 19mm with a Allen socket size of 6mm.