fix the date

[LeMarsu]

I would fix it if I could...

Sami

[fatbloke]

I've asked Stuart and he's sorting it today (14/04/04)

[LeMarsu]

Terry point Sut here :

Taken from the Cobalt RaQ4 User Manual. I assume the RaQ2 is about the same.

1. On the Server Management screen, click Control Panel on the left. The Service Settings table appears.

2. Click Time at the top. The Time Settings table appears. See Figure 28.

3. Select the time and date from the pull-down menu.

4. Select the correct time zone by clicking the Region, Country/Locale Zone fields.

5. As an option, you can also specify the name of a Network Time Protocol (NTP) server with which the RaQ 4 will synchronize it's internal clock every night. Enter the host name of the NTP server.

You can find a list of publicly available NTP servers at:
http://www.eecis.udel.edu/~mills/ntp/servers.html

6. Click Save Changes


If not by ssh:
on the prompt type run the following command with the correct date time string...
date -s "Tue Apr 14 15:20:09 BST 2004"


I recomment the 1st option as it uses NTP

[LeMarsu]

Fixed :D