PDA

View Full Version : M900ie fuelling


Chriswilly
01-01-2018, 11:00 AM
Anyone happen to know what voltage the injectors run on?

After a few weeks off the road the old 'bus' fired up on one cylinder only.
I have sparks but a 'damp' plug on the front cylinder.

About to fit new fuel filter, air filter and ignition coils for the SUMMER.

Thanks, Chris

Jez900ie
01-01-2018, 02:23 PM
Wow thats pretty organised, its Jan the 1st and you're already getting it together for summer! I wonder when and how long it will be this year?

I had the same issue with my bike - bad starting, front cylinder backfire & wet plug. Cleaned all the connections, changed the plugs but the problem continued. Dealer checked all the electrical system inc coils & relay starter connections etc etc. Everything checked out OK, except the charging system. I have a Mossfet reg/ rec fitted now. I don't know if that was a part of the problem as the awful weather means the bike is hibernating and hooked up to a Ctek optimiser. Still it does start immediately on the button which is good! Feb/ March will reveal whether the fault remains or if it was weak spark from marginal battery voltage.

Happy New Year Chris.

Chriswilly
01-01-2018, 07:37 PM
Thanks Jezz.

Wishing everyone a very good 'Biking Year' for 2018 - very pleased to have made it this far I think !!