Head lamp back and ignition cover

[524west]

Hi all,

Over the last few months I have managed to get an 07 S4R back together and to get it running. I’m now down to searching for the last few minor parts.

I’m after:

A head lamp bowl, the black section behind the lamp. Mine has a whopping crack in it....... glass and surround is fine.

The cover for the ignition switch just in front of the tank...?

I have an S4RS tank on the bike, not sure if this is any different in shamp to an S4R unit, but it’s pretty tight and the last one I sources from eBay was no where near.....

If you have any of the above, get in touch.

Mark

[Luddite]

I have an S4RS tank on the bike, not sure if this is any different in shamp to an S4R unit, but it’s pretty tight and the last one I sources from eBay was no where near.....


Hi Mark

I believe that the (Testastretta) S4R and S4RS tanks are the same (colour schemes apart) so they should be interchangeable.

Are they plastic like my old S2R? If so, any tightness might be down to expansion of the plastic as a result of ethanol in the fuel.

[Mark64]

Hi Mark, I have a headlamp bowl back off an s4r if you're interested, I'll try and sort out a photo of it later.