PDA

View Full Version : Not quite desperate but help still needed bolts for tea tray


Albie
05-09-2017, 06:51 PM
Hi guys got my last order back from Stein Dinse today.
That included as follows
2 nylon bushes for tank
a pair of rubber bushes exhaust hanger mount
2 new speedo mount bolts hence the 2 month wait
2 rear teatray bolts as per original
Now them tea tray bolts are meant to be the big headed with m6 thread and an 5mm mm socket size key and 30mm long
I got 2 plated small headed dome bolts 35mm long and a 4mm key size.
May have well not bothered. I tried them just in case even with a 6mm washer underneath but do not match or come close to the original.
Now I don't have to run the wings on the back I would just like the option to.

Please search your bolt boxes especially those who have hacked their tea trays off for the rear two are slightly longer than some front. Not always the case I hasten to add as why I don't have on mine.
If you can help thank you very much indeed and other than grafting some thread on mine I am stuck. So for now she will go wingless but just a shame I went to all the effort to find a pair and get gifted another pair.

Like these but 5 or 10mm longer

https://farm5.staticflickr.com/4298/35484394903_a01feddb1f_z.jpg (https://flic.kr/p/W4CNm8)IMG_2248[1] (https://flic.kr/p/W4CNm8) by Andy Patterson (https://www.flickr.com/photos/148687504@N08/), on Flickr