View Full Version : M600 Rearsets
popelli
11-06-2017, 06:28 PM
Looking for a set of rear sets for a 98 M600
the original hanger brackets look pants, also don't want passenger pegs and have hi level pipes so the original hanger plates are no longer fit for purpose
any recommendations or suggestions
been through the exercise on my bsa café project of making my own because I could not find anything suitable and hoping to avoid this with the monster
Yorkie
11-06-2017, 06:48 PM
You do not have to spend a fortune, and in most cases you just need an in-line pressure switch to finish them off:
https://www.ebay.co.uk/itm/142409762283
https://www.ebay.co.uk/itm/391784084857
I have similar on my 900SS.
Yorkie
350TSS
12-06-2017, 12:39 AM
I have the race supplies direct ones and am very happy with the quality for the price. You will need a brake pressure switch as there is no place to mount (and never will be) a standard Ducati mechanical switch. This is actually a benefit as the hydraulic switch is only about £4 and will be much more reliable
popelli
12-06-2017, 07:19 PM
Thanks for the replies
in line pressure swith is no issue, can either use the banjo bolt type or a normal pressure switch with the banjo bolt adapter - have used these on other projects
I have some DP ones on my 900 which have been on for years but there are plenty out there of the same design. Only thing to look out for in addition to the rear brake switch is that if you plan to use low level pipes you will need to come up with brackets and possibly spacers too- these were an option with the Ducati ones back in the day.
http://i1372.photobucket.com/albums/ag329/fluke900/Side_zpskcqmeccu.jpg (http://s1372.photobucket.com/user/fluke900/media/Side_zpskcqmeccu.jpg.html)
More importantly, we need to see photos of the BSA please!!!
CarloL
22-06-2017, 09:03 PM
FLip , off topic , do you have your front brake braided lines cable tied?
When I purchased my bike the lines where rubbing the front fender on suspension compression or from turning, have them cable tied back but it looks ****
Where did you get your belly pan and fitting kit :)
popelli
23-06-2017, 02:44 PM
FLip , off topic , do you have your front brake braided lines cable tied?
When I purchased my bike the lines where rubbing the front fender on suspension compression or from turning, have them cable tied back but it looks ****
Where did you get your belly pan and fitting kit :)
belly pan fitting kit available on ebay
brakes lines , loosen banjo bolt turn line so it clears what ever , hold line in place and retighten banjo bolt
CarloL
23-06-2017, 02:53 PM
belly pan fitting kit available on ebay
brakes lines , loosen banjo bolt turn line so it clears what ever , hold line in place and retighten banjo bolt
Thank you sir!
Just ordered a Belly pan off Skidmarx , they include the fitting kit
vBulletin® v3.8.3, Copyright ©2000-2024, Jelsoft Enterprises Ltd.