M900/851/888 Rear axle plates

[Nasher]

These were removed from brand new 851s years ago, and are still as bright in their original finish as they were when new.

Two pairs have very minimal marks associated with the axle nuts being tightened.
The third set unfortunately has a stain/mark right across the outside of one of them

http://i1277.photobucket.com/albums/y481/Nashersimages/Axle%20plates_zpsruvbnhhq.jpg (http://s1277.photobucket.com/user/Nashersimages/media/Axle%20plates_zpsruvbnhhq.jpg.html)

Brand new from Stein Dinse they are 17.30Euros each.

I'd like £20 a pair including postage for each of the better sets.
Or £10 for the third pair.

Nasher

[Mr Gazza]

These oem adjuster plates are 8gms lighter each, than fancy MVS billet ones.
They work perfectly, but be sure that they are correctly clipped under the arm before tightening the nuts, or they will bend.
They are for 17mm axles btw.

[Nasher]

They are for 17mm axles btw.

Thanks Gazza.
They have 16mm holes, as the ends of the 17mm Axles are reduced in size to take M16 Nuts.

Nasher.

[Mr Gazza]

Correct.. :mand: GLWS