Exhaust hangers

[tomscotland]

Hiya folks,
The exhaust cans are loose on my 95 600 Monster and shake a bit more than they should, they're secure enough and not likely to fall off or anything like that. I've been told it's because the bolts to the frame, which have rubber spacers, have become old and the rubber has lost it's properties so they are loose now and not tight. So far tightening them more makes no difference somehow. It looks like I need to replace these fittings now. Can I buy these anywhere without going back to Ducati ? Any ideas or suggestions welcome, I'm not very handy myself but love this bike and hate when it isn't set up right.
Tom
:snoopy:

[Jimi216]

Shouldn't cost much at all pal from Ducati, if it's just the rubber spacers you are after. If you have your manual phone through with the part number and it should be no more than a couple of quid. I replaced quite a few bits on my evo and total cost was less than a fiver

[tomscotland]

Ello Jimi,
I do have a manual so I'll call them on Tuesday as you suggest.
Tom

[Darkness]

Stein Dinse list them as available at €2.09 each plus p&p, and you need Four of http://www.stein-dinse.biz/images/product_images/popup_images/76410011a.jpg
http://www.stein-dinse.biz//eliste/index.php
Or give Craig at Moto Rapido a call (Don't forget to ask for the UKMOC discount).