Ducati performance Remus Titanium Exhausts

[Dirty]

May as well pass these on as they won't be going back on my bike.

Pair of DP Remus Ti exhausts. Pretty rare, I've never seen any Ti versions on fleabay myself so I had to get a few expert opinions to determine value. Very good condition, they are a bit grubby and obviously used. Some marks where the straps have rubbed but have no major damage or scrapes, a bit of spit and polish and they'd be like new. Comes with hi level pipes, carbon fibre shield, springs etc.

These will fit 600/750/900 and perhaps others.

£300 + P&P


http://s19.postimg.org/6lm5jr3o3/IMG_4845.jpg
http://s19.postimg.org/hydg9iedv/IMG_4846.jpg
http://s19.postimg.org/i9g7eassz/IMG_4847.jpg
http://s19.postimg.org/r4vqwsjmb/IMG_4848.jpg
http://s19.postimg.org/xxw3t2afn/IMG_4849.jpg
http://s19.postimg.org/vphxbq3bn/IMG_4850.jpg
http://s19.postimg.org/9invs0bir/IMG_4851.jpg
http://s19.postimg.org/4ibqc33v7/IMG_4852.jpg

[Wildfire]

I have these on my M600 (got them as New/Old stock from a dealer, all boxed etc.) I can attest they sound great, well worth it.

[Mr Gazza]

I might be interested if it's possible to find link pipes for low level fitting.

[Dirty]

I might be interested if it's possible to find link pipes for low level fitting.

Without wanting to put off a potential sale I think the Remus low levels were different (see nashers bike (http://www.ukmonster.co.uk/monster/showpost.php?p=492434&postcount=1))therefore I don't think there will be link pipes around that are a quick fit. You would probably need to chop the hi level pipes up or get a new set made.

[slob]

I have a set of DP/Remus (alloy) low levels and the link pipe is part of the front end cap. I imagine a spring fitting one shouldn't be too hard for a fabricator to make.

[cactus]

I have these in carbon fibre on my 900ie, they're low level and sound bloody ace.

[Mr Gazza]

Okay it looks like it would be tricky to mount these in a low level position.
Unless someone has a set of magic link pipes that would work for me, then I think I will suspend my interest so Dirty can make a sale.

I took a set of alloy high level Remus cans off my bike as they're not my thing. I must admit I have never seen DP Titanium ones and it's certainly rare to see a set so complete and in such good condition...Don't think they will be for sale for long....:mand:

[Drumnagorrach]

Garry, would the link pipes off my old M900ie fit they go from standard pipe to 50mm carbon can co silencers.
Happily send em down for you to try.http://i241.photobucket.com/albums/ff171/gasaxephoto/link%20pipes.jpg (http://s241.photobucket.com/user/gasaxephoto/media/link%20pipes.jpg.html)

[utopia]

And ...
If the link pipes need a thin shim/bush to adapt the diameters I could probably knock you something up on the lathe.
I've probably got a smidge of stainless wire left and if so, I could bend up a couple of spring hooks too.

I think Pete from Melton had the hi level versions of these on his 750 and that certainly had a lovely grumble.

[Albie]

Its the mounts on the high levels that's the problem fitting low too. Other than using the bands and adapting. Low mounts usually have the insert nuts to fix to brackets.

[Dirty]

SOLD

And readies immediately spent on the bike! :)