Anyone fitted Renthal Ultra Low to M1100 ?

[Italiatwin]

As the title suggests I'm thinking of fitting higher bars.
I'm wondering if any of you have fitted these bars and if you have had any cable issues ? They are no wider than standard, in fact I believe they are 20mm narrower but probably about 30mm higher.

[don_matese]

Not on an M1100 but on my M600 they are the same height overall as the standard ones, just narrower by a few mm. What I did find though was the middle dip was wider than the standard bars and fouled on the top of my shock absorbers.

[SteveM900]

The M1100 has fat bars, so unless you are changing the risers also they won't fit.
I fitted Rizoma fatbars from Moorespeed Racing to mine. No issues with cables, but had to adjust the lockstops slightly to stop the switch gear hitting the tank. You also need to drill holes for the switch gear lugs.
Much better than the horrible bend on the original bars.

[SunEye]

The risers from the 1100evo are 20mm higher than those on the 1100 and are a direct replacement. If all you want are higher bars that would do it.

P.S. I actually have a set of 1100evo risers for sale as I replaced them with ones from an 1100 to lower the bars by 20mm.

[Italiatwin]

Hi Pete

No I'm after higher but a different bend as well.

[Italiatwin]

Rizoma 009 fitted, all standard cables but turned throttle housing upside down.
I'm very happy, now a super comfy bike.