PDA

View Full Version : Built not bought: DIY Corse Clutch Case

Yorkie
23-01-2016, 05:45 PM
After the last clutch case I chopped up I thought I would have another go.

Last one:

http://i1286.photobucket.com/albums/a615/Yorkie13/Ducati%20Monster/IMG_1387_zpsbfjkqa0k.jpg (http://s1286.photobucket.com/user/Yorkie13/media/Ducati%20Monster/IMG_1387_zpsbfjkqa0k.jpg.html)

The next one. I drilled some corner points by hand:

http://i1286.photobucket.com/albums/a615/Yorkie13/Ducati%20Monster/Cafe%20Racer/IMG_1484_zpsfuxmbwnn.jpg (http://s1286.photobucket.com/user/Yorkie13/media/Ducati%20Monster/Cafe%20Racer/IMG_1484_zpsfuxmbwnn.jpg.html)

I then drilled the centre bits out:

http://i1286.photobucket.com/albums/a615/Yorkie13/Ducati%20Monster/Cafe%20Racer/IMG_1485_zps1ac2re2i.jpg (http://s1286.photobucket.com/user/Yorkie13/media/Ducati%20Monster/Cafe%20Racer/IMG_1485_zps1ac2re2i.jpg.html)

I filed the required shape:

http://i1286.photobucket.com/albums/a615/Yorkie13/Ducati%20Monster/Cafe%20Racer/IMG_1486_zpsja4c6kjt.jpg (http://s1286.photobucket.com/user/Yorkie13/media/Ducati%20Monster/Cafe%20Racer/IMG_1486_zpsja4c6kjt.jpg.html)

It was then tidied up and finished off:

http://i1286.photobucket.com/albums/a615/Yorkie13/Ducati%20Monster/Cafe%20Racer/IMG_1489_zpseewubrdf.jpg (http://s1286.photobucket.com/user/Yorkie13/media/Ducati%20Monster/Cafe%20Racer/IMG_1489_zpseewubrdf.jpg.html)

Ready for powder coating.

I just need another one to play with now.

Yorkie
utopia
24-01-2016, 05:50 PM
That looks much beefier and gives better support to the cover fixings.
I was a little concerned about the first one in that regard.
This one looks to have definite potential though.
And homebuilt ....... nice.

Go on ... polish it.
It'll save a few quid too.
And very, very many micrograms. :)
Yorkie
24-01-2016, 06:12 PM
This one is for my Cafe Racer project, the other one I butchered will go on the Monster refresh and without a cover.

Yorkie
Mr Gazza
24-01-2016, 06:43 PM
I like your proper cordless drill.....I haven't used one like that for over thirty years.
Yorkie
24-01-2016, 07:49 PM
I like your proper cordless drill.....I haven't used one like that for over thirty years.

Yep wooden handles and everything!

Yorkie
Nottsbiker
24-01-2016, 09:07 PM
Always wondered how NCR made their expensive cases ;)