S4R Single Sider

[Flip]

Nothing to do with me but I have dealt with these guys before and were very fair so for all those who like the idea of fitting a single sided swing arm to your Monster this might persuade you into a Winter project with which in my opinion is probably the nicest looking single sider they ever fitted.

http://www.ebay.co.uk/itm/DUCATI-MONSTER-S4-S4R-SINGLE-SIDED-SWINGING-ARM-HUGGER-BREMBO-CALIPER-HUB/172019433783?_trksid=p2045573.c100034.m2102&_trkparms=aid%3D555012%26algo%3DPW.MBE%26ao%3D2%26 asc%3D20140107092241%26meid%3Dd2d28b3506c04e758745 99f71e0dfb47%26pid%3D100034%26rk%3D1%26rkt%3D4%26s d%3D221939772624

[Albie]

May I add you will need for sure an easily obtainable rear wheel from either a 916 or 748 or any Sr or multi strood. When I did mine I was also keen to fit the nicer foot controls so you need the longer threaded pivot bolt too. I am not quite sure but I think you may get away with using the stock pivot bolt with stock rearsets or after market rearsets but I ground mine off before I could try. As I was also fitting a S4R exhaust system on the side I am also not sure about the routing of stock rear header going through swingarm.
I point these things out as you will be needing to check list them. The concept is good and easy. How far you go is up to you but they look nice with that swingarm in my opinion .

[slob]

I've got a spare S2R rear wheel if anyone decides to go for it

[Albie]

I wait with excitement.