M900 Termies

[Tosh]

Hi all, I have a 2001 M900 Sie with low level Carbon Termies, is it possible to get link pipes to invert them to high level ? Suppose I'd need mounting brackets too.
Thanks for any info,,,

[Dukedesmo]

I have high level termis but they are quite short and I'm not sure if the low level ones maybe longer? if so they would stick out too far when fitted in the high position. Otherwise I would think they'd fit?

[Tosh]

Ah , thanks for that Dukedesmo, never even thought about the length. Will leave them where they are.

[Darren69]

There was a set of high levels on ebay recently starting at £350. They may still be there.

[Darren69]

here:-

http://www.ebay.co.uk/itm/ducati-monster-termignoni-high-level-exhaust-/221929493723?hash=item33ac0754db:g:jtUAAOSwqv9V7I9-

[Darkness]

Hi Tosh
A few things to be aware of if you go for a second hand set of high termi's like the one Daren pointed to are:
1. There should be a pair of spacers to go between the frame and the larger alloy mount. They may be the spacers presently between the ends of the clamp straps on the advertised one?
2. You need a set of spacers to go between the [Nearside?] footrest hanger and frame mountings to create enough gap for the link pipe. It's still pretty tight though. You can make do that with penny washers if you need to.
3. Some other makes of pipes have flattened or oval section link pipes to fit through without spacers.
4. Don't forget to support the bike if taking bolts out of the nearside footrest hanger as two of them hold on the side stand too!