750 bits for sale

[smiffyraf1]

now i have my 1000 theres some old bits from my 750 i had saved with the intention of putting on my new one and obviously will not now fit.
i know its frowned upon but open to offers on these really

set of standard m750 side panels. one has a crack near a mounting hole but is glued and is fine. cant see it when fitted. offers around £10

http://i1138.photobucket.com/albums/n530/smiffyraf1/side_zpsambsvkzh.jpg

carbon belt covers i believe will fit a 600 too has a repair which can be seen on the top one repair done with real carbon by a specialist it is just where one of the braided hoses ran and had worn it through vibration. cant really see when fitted. offers around 40

http://i1138.photobucket.com/albums/n530/smiffyraf1/IMG_6930_zpsfv7048gf.jpg

and absolutely awesome custom seat. re covered by lee at viking seat who did the 'chicken shack monster' it is a work of art and makes a big difference as the ribbed section is grippy. has a slight bit of wear near the front as it was on the bike in the crash but miraculously escaped pretty much unscathed. and just an indent around where the rear seat cowl was fitted. if this fitted the later models i would be keeping it as it was the best bit about my old monster. :(
offers around 80

http://i1138.photobucket.com/albums/n530/smiffyraf1/IMG_6935_zpsjj0pkjg9.jpg

http://i1138.photobucket.com/albums/n530/smiffyraf1/IMG_6936_zpsbdaph0yr.jpg


prices inc postage
if im way off with any values let me know

[Wildfire]

If the covers fit a2 2001 I'll have them

[smiffyraf1]

The belt covers? Hopefully someone can advise me further but to my understanding they will fit

[Wildfire]

Yep, the belt covers. I have the newer style ones with the rounded ends. What year was your M750?

[smiffyraf1]

it was a 98, when i bought them from a ducati dealer they did say they would fit all the 600 derived engines inc. 695 etc.

[Wildfire]

Ok, cheers. Let me check the hole line up when I get in tonight and if it looks good you have yourself a deal.

[HongKongPhooey]

Dibs on the engine covers... if they don't go to Wildfire.

Thanks!

[Wildfire]

Smiffy, I'll take them. I'll PM you for payment details.

HK, if they don't fit they're yours for the same amount.

[WAB78]

Does that seat fit on the M900 and accommodate the owl too?? Me likes!!

[smiffyraf1]

Yep fits with the cowl and will fit early monsters with the bar seat lock not the pin

[smiffyraf1]

The seat is truly lovely. Viking seats did a great job on it

[Dirty]

I want an owl on my bike now! How cool would that be!

[smiffyraf1]

http://i30.tinypic.com/4ibsso.jpg

[WAB78]

You buggers!!! Never spotted that typo. :fou:

[WAB78]

Yep fits with the cowl and will fit early monsters with the bar seat lock not the pin

Ahh hold up. I have a 2001 M900sie and just looked under the seat and it is the type with the pin.....does that mean it wont fit??:(

[Dirty]

You could possibly get away with swapping the pin over to the new seat

[Dirty]

http://i30.tinypic.com/4ibsso.jpg


Always said R1's are wicked! :woot:

[WAB78]

You could possibly get away with swapping the pin over to the new seat

Like your style Dirty, like your style. :banana:

[smiffyraf1]

have just pm'd before reading your post bill
unfortunately i think it will be too much hassle. as not only is the catch different but the angles at the front where it sits either side of the tank are different.

[smiffyraf1]

thats the reason i am getting rid of it and not keeping it as its completely different shape to my '03

[Dukedesmo]

Hope you don't leave that seat on the oven too long, I wouldn't want it to melt... :D

[Mr Gazza]

Smiffy's seat has the small radii on the forward most points and a loop type catch.

That makes it good for pre 1999 bikes as a general rule.

You can swap the catch WAB78, but have a close look at those front radii. Yours will be bigger.

[WAB78]

Oh pants. Oh well.

Thanks for the advice chaps.

[smiffyraf1]

belts sold but if dont fit will let you know HKP

[smudger64]

pm sent on the seat!

[smiffyraf1]

belt covers and seat now sold.
just original m750 side panels left. might have some other bits left that may not fit. in particular some conti replicas made by termignoni i believe. just waiting to see if they will fit my thou.