Handlebar change.

[richy]

I would like to change my bars for some with a higher rise,my standard 1100 Evo ones seem to be have about 20mm of rise.
Rizoma bars have a 60mm rise but 30mm less on the width and an extra 20mm on the pullback.
Has anyone ever fitted these bars as im wondering if the cables and lines are long enough to reach.

Thanks.

[Albie]

I would like to change my bars for some with a higher rise,my standard 1100 Evo ones seem to be have about 20mm of rise.
Rizoma bars have a 60mm rise but 30mm less on the width and an extra 20mm on the pullback.
Has anyone ever fitted these bars as im wondering if the cables and lines are long enough to reach.

Thanks.

I have streetfighter ones on mine. Think about 20mm narrower than stock. Much more comfy too. You do have to file of the pins though for the switchgear.

[buzzbomb]

I've fitted rizoma bars to quite afew monsters without any problems,you just have to carefully tease the the wiring and fluid pipes to reach that little bit further.

[Cobra88]

Hi Richy

I have the MA008 rizoma bars (for CB1000R/Z1000) 50 mm rise.
And the 42mm rizoma risers.

Ends up about 10mm higher than standard but much more comfortable as the std bars
Have a really bad wrist angle.

[richy]

Hi,thanks for the replies.

[richy]

Hi Richy

I have the MA008 rizoma bars (for CB1000R/Z1000) 50 mm rise.
And the 42mm rizoma risers.

Ends up about 10mm higher than standard but much more comfortable as the std bars
Have a really bad wrist angle.

Hi does the switch gear on the bars you have changed to clear the tank ok,as the original bar switch gear is very close.

[Cobra88]

Hi Richy

Yes mate clears the tank.
Lockstops are easy to adjust anyway

Regards
Rick
just a quick pic on phone
http://rickpiper.cbfsim.org/images/Rizoma.jpg