Gazza's Bling sale.

[Mr Gazza]

Please give generously...I am saving up for some new clutch parts..!!:D

First item;

One pair of Oberon fork pre-load adjusters in bloo.

Retained by three leetle teenzy allen grub screws....Will include an allen key if I can find one.

They fit the Showa adjustable forks as fitted to 2000 900Sie, and others.

£10 posted.

[Mr Gazza]

I think this may be an Oberon item, but not sure?

3" bar end mirror and clutch side bar end bung.

Note this is for the thick wall ally bars with 14/13mm I.D.

Sold to the Gentleman in Ireland

[Mr Gazza]

One pair of Oberon studded riders footpegs in black.

(matching collar for your Rotwieller not available..Sorry)

These are a straight swap for standard riders pegs, and use the same pins, springs and circlips. (not supplied. Sorry)

Sold to the Lady in Ipswich

[Martin696]

One pair of Oberon studded riders footpegs in black.

(matching collar for your Rotwieller not available..Sorry)

These are a straight swap for standard riders pegs, and use the same pins, springs and circlips. (not supplied. Sorry)

£15 posted

Blimey they look like they'd go with that 'other' item that was on ebay a week or so ago... I think it's at Bex's now?

[Mr Gazza]

One pair of Oberon Black Billet 6 way Adjustable levers.



Sold to the gentleman in Finland

[Mr Gazza]

Blimey they look like they'd go with that 'other' item that was on ebay a week or so ago... I think it's at Bex's now?

Yup...I think Anne Summers does them aswell...:chuckle:

[Mr Gazza]

These are in pretty good nick and polish up well.
There are marks, but mostly on the inner side where they are impossible to see when mounted. There is a "Golden" colour coming at the "bike" end of the link pipes, but this will polish out easily..(Can do if you want.?)

Again these are from a 900Sie but will fit across the range I imagine.

The volume is just about MOTable, but keep the standard cans handy just in case..!!
They issue a nice Ducati bellow.:D

They had contacted the hugger when mounted to my bike and also the suspension hoop.
They really need to be fitted with spacers (about 15mm) behind the footrest hangers to make a neat job. this would probably need longer bolts for the hangers.
The bike will still be much slimmer than standard with this mod.

It will also be much neater to do away with the triangular brackets on the cans and rely on the brackets that pick up the heel guard bolts on the hangers. Or perhaps those brackets pick up on certain rearsets too?

Nice cans if mounted properly..

£100 collected +£16 for posting.

More pics in the next post.

[Mr Gazza]

More of the same.........

[bluestoesonnose]

Shame they're not low level...

[AmoK]

PM sent for the levers

[Mr Gazza]

Shame they're not low level...

Yeah..! I'm a low level guy meself......:D

[Funkatronic]

2nd dibs on the levers please

[Saint aka ML]

3rd dibs on levers just wait till you say yes so I can chase up Funk and Amok to kill their net .....

[bex]

Blimey they look like they'd go with that 'other' item that was on ebay a week or so ago... I think it's at Bex's now?

Yes. Londontown Get Together Part 5 is an S&M Party.

[Dirty]

Yes. Londontown Get Together Part 5 is an S&M Party.

Oh not again!

[gary tompkins]

Yes. Londontown Get Together Part 5 is an S&M Party.

Is it bring a bottle?

http://farm5.staticflickr.com/4024/4272290399_f2f9ab4c99_z.jpg?zz=1

[Mr Gazza]

Is it spiked..??

[Mr Gazza]

I am told this is a "Skidmarx" belly pan.

It is GRP and a very good colour match to the red on my 2000 model.

It fits M900s and so on, but not the four valve models.

Very good condition in all the areas visible when mounted, but the underside has multiple little pits from road gravel coming off the front wheel, a red coloured wax would render these totally invisible. There is a chip in the edge which the gearlever covers up.

All the brackets are there but I have no fixing screws, (4) standard fairing screws should work fine. I have photos of all the brackets in place on the bike to aid fitting.

I understand that there can sometimes be a ground clearance issue with these pans (not always). It seems to me that the very easy fix to this is to remove the "bump" on the underside that accomodates the exhaust pipe and improve airflow and looks at the same time..

Sold to the Gentleman in Finland.

[AmoK]

PM sent for the bellypan

[He11cat]

Pm for foot pegs ... I'm so going to regret this post!
My Gimp likes them ..
Could you just double check you don't have the matching collar and lead please
The naughty bleeder keeps hot footing it out of the park :( and down pub.. Cheek of it !http://i428.photobucket.com/albums/qq3/helsinkvampire/5B7D195C-85A1-4985-AC25-A93AC046B340-1057-0000011B59AD7C00_zps3128011d.jpg

GT I nearly brought that bottle :)
But I do seriously own this version .

[Mr Gazza]

PM's dealt with, then Lightning knocked my broadband out....Back now, hope the messages got through.?

Chain and collar are still in use I'm afraid He11cat, but I might be able to dig out a secondhand gimp suit. (slightly soiled..!):chuckle:

[gary tompkins]

Is it spiked..??

Could be arranged

I'll have a chat with 'Rohypnol' Ron