Help with sliders/crash bobbins please! I'm new!

[Nwsparky]

http://i770.photobucket.com/albums/xx350/smigga46/95B3556E-255D-4817-BB11-6E5883B4EC57-167-000000F611384E7B_zps80b1c917.jpg

Ok so I've bought sliders, I'm assuming I remove the top engine mount and replace? Can someone give me a step by step guide plz as I'm scared of dropping my engine!
Cheers

[slob]

You should be able to use the crash protector spindle to gently drift out the existing engine mounting bolt, which means the engine won't ever be completely unsupported. Just make sure your don't damage the threads doing it. Make sure the bike is securely supported on a paddock stand before you start.

[Wildfire]

On a separate note, can you get M600 sliders?

[slob]

yes you can, earlier bikes have smaller diameter bolts so order the right one

[Nwsparky]

Fast bike bits in Wrexham was where I found mine, cheapest I could see on the net.
Buying a stand tonight slob! Thanks for your help....I may need more...:chuckle:

[Nwsparky]

Well first bit of tinkering done!
http://i770.photobucket.com/albums/xx350/smigga46/C173F904-66E3-4B91-9263-C4D4E65E0BBA-1001-000001075055BBA6_zps44104299.jpg

Not difficult and really good quality kit....

[slob]

Bike looks to be in stunning condition for a relatively early 620.

[Nwsparky]

Thanks, it was a good find, had a really sheltered life, less than 200miles some years, 3k in first 8 years then 3k in last 3. It will only get more stunning, I was touching tiny stone chips in last night....